Home > Products > Gas analyzer
Nitrogen/Oxygen Analyzer

Nitrogen/Oxygen Analyzer

    Nitrogen/Oxygen analyzer is widely used in the determination of oxygen concentration in N2 reflow furnace, N2 DC furnace, air separation unit, gas purity management, protective inert gas, ferrite sintering furnace and other environments.

Nitrogen/Oxygen analyzer adopts imported new long-life imported zirconia detector with high sensitivity and fast response. nitrogen-oxygen analyzer has a high-precision temperature automatic compensation system to eliminate the influence of ambient temperature.

Nitrogen/Oxygen analyzer main features:

1.N2 or O2 display mode is available;

2.The upper and lower alarm limits can be set freely among the whole range;

3.The accurate measurement of oxygen concentration among the range of ppm ~ % can be met through one-point calibration in the air;

4.With power supplied at a wide range, the influence from mains fluctuation on the analyzer can be eliminated;

5.With an external printer, the test parameters can be printed manually or automatically (optional);

6.The size is small and easy to maintain.

Nitrogen/Oxygen analyzer technical parameters:

Test principle

zirconia

Display mode

5 bits LED display

Test range

10/100/1000ppm21.000% O2/N2

Accuracy

≤±1.5% FS          

Repeatability

≤±1%

Response time

T90≤30S

Analog output

4-20mA.DC(non-isolated output, loaded resistance lower than 500 Ohm) 

1 way programmable alarm output (Dry contact type, maximum load 220VAC/2A)  

Environment humidity

90%RH

Power supply

AC85~264V 50/60Hz

Sample gas temperature

-10 ~ +50

Sampling mode

sample gas pass-in

Sample gas flow

300 ~ 500ml/min

Background gas

nitrogen and oxygen mixed gas

Appearance Size

80mm×160mm×142mm(H×W×D)

Install Hole Cut

75mm×151mm(H×W)

Serving life

20000 hours (under normal use)

Gas cycle port

Φ6 plastic pipe inlet and outlet 

Install mode

frame mount or retaining clap carried by the oxygen sensor

Disclaimer: The product introduction content (including product images, product descriptions, technical parameters, etc.) of this site is for reference only. As the update may not be timely, there will be some differences between the content and the actual situation. Please contact our sales staff to confirm. The information provided on this site does not constitute any offer or promise, and the company will improve and modify any information on the website from time to time without prior notice.

Contact Us
  • E-mail: cysi@cysi.wang
  • Tel: +86 371 5519 9322
  • Fax: +86 371 8603 6875
  • Add: No. 820, 8th Floor, 1st Unit, 9th Block, Cuizhu Street, High-Tech Zone, Zhengzhou, Henan, China




Follow Us

Copyright © Zhengzhou CY Scientific Instrument Co., Ltd. All Rights Reserved   

| Sitemap |       Technical Support: